Year :2024
Published in :Passive control of the condensing flows in the three-dimensional steam turbine blade using a suction technique
Title of publication:Physics of Fluid
Published in :Use of air curtains for creating safe areas in bodybuilding salons for controlling the spread of SARS-CoV-2-carrying respiratory droplets
Title of publication:european physical journal plus
Published in :Multi-objective optimization of the wet at the blade's inlet and surface heating for wet steam flow in turbine blade cascade by TOPSIS method
Title of publication:International Journal of Heat and Mass Transfer
Published in :Optimization of operating conditions in the steam turbine blade cascade using the black-box method
Title of publication:Propulsion and Power Research
Published in :Optimization of operating conditions in the stage of steam turbine by black-box method
Title of publication:International Communications in Heat and Mass Transfer
Published in :Evaluation of a New Droplet Growth Model for Small Droplets in Condensing Steam Flows
Title of publication:Energies
Year :2023
Published in :Optimization of the surface heating for a stationary cascade turbine blade in wet steam flow
Title of publication:Thermal Science and Engineering Progress
Published in :An investigation comparing various numerical approaches for simulating the behaviour of condensing flows in steam nozzles and turbine cascades
Title of publication:Engineering Analysis with Boundary Elements
Published in :Optimization of inlet conditions of hot steam injection into the non-equilibrium condensing steam
Title of publication:Physics of Fluid
Published in :Multi-objective optimization of supercooled vapor suction for decreasing the nano-water droplets in the steam turbine blade
Title of publication:International Communications in Heat and Mass Transfer
Published in :Multi-objective optimization of the effects of superheat degree and blade pitch on the wet steam parameters
Title of publication:International Journal of Heat and Mass Transfer
Published in :Numerical analysis of hot steam injection through an embedded channel inside a 3D steam turbine blade
Title of publication:Applied Thermal Engineering
Published in :Enhancing low-pressure stage steam turbine using the TDLD criterion and the TOPSIS analysis
Title of publication:JOURNAL OF MECHANICAL ENGINEERING SCIENCE
Published in :Validation of the CFD Tools against In‐House Experiments for Predicting Condensing Steam Flows in Nozzles
Title of publication:Energies
Published in :Investigating the Parameters Affecting Gravity Slurry Transfer Through Pipes
Title of publication:
Published in :Vehicle refrigeration modification using an ejector: Optimization and exergoeconomic analysis
Title of publication:Journal of the Taiwan Institute of Chemical Engineers
Published in :Prediction of COVID-19 Infection in Dental Clinic by CFD and Wells-Riley Model, Identifying Safe Area and Proper Ventilation Velocity
Title of publication:INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
Published in :Transient Computational Fluid Dynamics Analysis of Passive Cooling in a Building with Diurnal Radiative Cooling Material Coated onto Its Rooftop
Title of publication:Energy Technology
Published in :Selecting the Safe Area and Finding Proper Ventilation in the Spread of the COVID-19 Virus
Title of publication:Energies
Published in :Reducing the condensing flow effects on the steam turbine blades through modified design geometry
Title of publication:Physics of Fluid
Published in :The search for an appropriate condensation model to simulate wet steam transonic flows
Title of publication:International Journal of Numerical Methods for Heat & Fluid Flow
Published in :Simultaneous Effects of Hot Steam Injection and Surface Heating through an Embedded Channel of Steam Turbine Cascade
Title of publication:International Journal of Heat and Mass Transfer
Year :2022
Published in :Numerical simulation of nucleating flow and shock capturing in steam turbines by a simple low-dissipation upwind scheme using an Eulerian-Lagrangian model
Title of publication:Computers & Fluids
Published in :Investigation of the effects of mechanical and underfloor heating systems on the COVID-19 viruses distribution
Title of publication:european physical journal plus
Published in :Optimization of the pitch to chord ratio for a cascade turbine blade in wet steam flow
Title of publication:Applied Thermal Engineering
Published in :An investigation of fnding the best arrangement of hot steam injection holes in the 3D steam turbine blade cascade
Title of publication:Journal of Thermal Analysis and Calorimetry
Published in :Numerical modeling of droplets injection in the secondary flow of the wet steam ejector in the refrigeration cycle
Title of publication:INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
Published in :Passive Control Optimization of Condensation Flow in Steam Turbine Blades
Title of publication:International Journal of Mechanical Sciences
Published in :Numerical and experimental investigation of the effect of the optimal usage of pump as turbine instead of pressure-reducing valves on leakage reduction by genetic algorithm
Title of publication:Energy Conversion and Management
Published in :Investigation of the effect of water droplet injection on condensation flow of different nozzles geometry
Title of publication:european physical journal plus
Published in :Numerical investigation of roughness effect on wet steam ejector performance in the refrigeration cycle
Title of publication:Heat and Mass Transfer
Published in :An applicable surface heating in a two-phase ejector refrigeration
Title of publication:european physical journal plus
Published in :Finding the Proper Position of Supply and Return Registers of Air Condition System in a Conference hall in Term of COVID-19 Virus Spread
Title of publication:INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
Published in :Numerical investigation of serpentine earth-to-air heat exchanger for passive building heating systems by recovery criteria
Title of publication:Sustainable Energy Technologies and Assessments
Published in :Unsteady non-equilibrium condensation flow of 3-D wet steam stage of steam turbine with roughness using sliding mesh method
Title of publication:International Journal of Thermal Sciences
Published in :Study of USBR VI Stilling Basin with Entropy Generation Index
Title of publication:Experimental Techniques
Published in :Optimization of the Trailing Edge Inclination of Wet Steam Turbine Stator Blade Towards the Losses Reduction
Title of publication:Experimental Techniques
Year :2021
Published in :Investigation of the effects of wind velocity and flame pulldown on flare flame shape in Khangiran gas refinery
Title of publication:Heat and Mass Transfer
Published in :A modified model of the suction technique of wetness reducing in wet steam flow considering power-saving
Title of publication:ENERGY
Published in :Numerical simulation and passive control of condensing flow through turbine blade by NVD Method Using Eulerian–Lagrangian Model
Title of publication:Computers & Mathematics with Applications
Published in :COVID-19 spread in a classroom equipped with partition – A CFD approach
Title of publication:Journal of Hazardous Materials
Published in :A blackbox optimization of volumetric heating rate for reducing the wetness of the steam flow through turbine blades
Title of publication:ENERGY
Published in :Analysis of Heterogeneous Nucleation and Erosion Behavior Considering the Injection of Impurities into Wet Steam Flow Using Poly-dispersed Method
Title of publication:International Journal of Heat and Mass Transfer
Published in :Optimization variables of the injection of hot-steam into the non-equilibrium condensing flow using TOPSIS method
Title of publication:International Communications in Heat and Mass Transfer
Published in :Natural convection of nanofluid-filled annulus with cooled and heated sources and rotating cylinder in the water near the density inversion point
Title of publication:The European Physical Journal
Published in :Optimization of Wells turbine performance using a hybrid artificial neural fuzzy inference system (ANFIS) - Genetic algorithm (GA)
Title of publication:Ocean Engineering
Published in :A blackbox optimization of volumetric heating rate for reducing the wetness of the steam flow through turbine blades
Title of publication:ENERGY
Published in :The best angle of hot steam injection holes in the 3D steam turbine blade cascade
Title of publication:International Journal of Thermal Sciences
Published in :Optimization variables of the injection of hot-steam into the non-equilibrium condensing flow using TOPSIS method
Title of publication:International Communications in Heat and Mass Transfer
Published in :COVID-19 spread in a classroom equipped with partition – A CFD approach
Title of publication:Journal of Hazardous Materials
Published in :Optimization of Wells turbine performance using a hybrid artificial neural fuzzy inference system (ANFIS) - Genetic algorithm (GA)
Title of publication:Ocean Engineering
Year :2020
Published in :Numerical investigation of wet inflow in steam turbine cascades using NURBS-based mesh generation method
Title of publication:International Communications in Heat and Mass Transfer
Published in :Numerical investigation of wet inflow in steam turbine cascades using NURBS-based mesh generation method
Title of publication:International Communications in Heat and Mass Transfer
Published in :Numerical simulation of sediment deposition and trapping efficiency estimation in settling basins, considering secondary flows
Title of publication:International Journal of Sediment Research
Published in :Experimental study of the effective parameters on the offshore wind turbines airfoil in pitching case
Title of publication:Ocean Engineering
Published in :The Effects of Wall Curvature and Adverse Pressure Gradient on Air Ducts in HVAC Systems Using Turbulent Entropy Generation Analysis
Title of publication:INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
Published in :Parametric analysis of combined power and freshwater producing system for natural gas engine heat recovery
Title of publication:Energy Conversion and Management
Year :2019
Published in :Entropy generation and exergy destruction in condensing steam flow through turbine blade with surface roughness
Title of publication:ENERGY CONVERSION AND MANAGEMENT
Published in :Entropy generation analysis of wet-steam flow with variation of expansion rate using NURBS-based meshing technique
Title of publication:INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Published in :Investigation on the effects of water steam ejector geometry in the refrigeration systems using entropy generation assessment
Title of publication:JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Published in :Improvement of the wet steam ejector performance in a refrigeration cycle via changing the ejector geometry by a novel EEC (Entropy generation, Entrainment ratio, and Coefficient of performance) method
Title of publication:INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
Published in :Numerical Investigation of Effects Polydispersed Droplets on The Erosion Rate and Condensation Loss in The Wet Steam Flow in The Turbine Blade Cascade
Title of publication:APPLIED THERMAL ENGINEERING
Published in :Investigation of numerical simulation of non-Newtonian flows dam break and dam breach in open channels using modified VOF method
Title of publication:PROGRESS IN COMPUTATIONAL FLUID DYNAMICS
Published in :Entropy generation analysis of S825, S822, and SD7062 offshore wind turbine airfoil geometries
Title of publication:OCEAN ENGINEERING
Published in :Investigating the effect of water nano-droplets injection into the convergent-divergent nozzle inlet on the wet steam flow using entropy generation analysis
Title of publication:INTERNATIONAL JOURNAL OF THERMAL SCIENCES
Published in :A comprehensive investigation of finding the best location for hot steam injection into the wet steam turbine blade cascade
Title of publication:ENERGY
Published in :Entropy analysis of pitching airfoil for offshore wind turbines in the dynamic stall condition
Title of publication:OCEAN ENGINEERING
Published in :Effects of using obstacles on the dam-break flow based on entropy generation analysis
Title of publication:European Physical Journal Plus
Published in :Optimization volumetric heating in condensing steam flow by a novel method
Title of publication:JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Published in :On the application of isogeometric finite volume method in numerical analysis of wet-steam flow through turbine cascades
Title of publication:COMPUTERS & MATHEMATICS WITH APPLICATIONS
Year :2018
Published in :Investigating the entropy generation in condensing steam flow in turbine blades with volumetric heating
Title of publication:ENERGY
Published in :Enhancement of the air ejector performance: primary nozzle and mixing chamber investigation
Title of publication:Journal of the Brazilian Society of Mechanical Sciences and Engineering
Published in :Entropy generation analysis as design criteria in dam-break flows for non-Newtonian fluids
Title of publication:European Physical Journal Plus
Year :2017
Published in :Entropy generation analysis of eccentric cylinders pair sources on nanofluid natural convection with non-Boussinesq state
Title of publication:ADVANCED POWDER TECHNOLOGY
Published in :A novel explicit equation for the friction factor prediction in the annular flow with drag-reducing polymer
Title of publication:European Physical Journal Plus
Published in :The Entropy Generation Rate Minimization for a Proposed Air Ejector for the Carpet Industry
Title of publication:MECCANICA
Published in :Optimization of the blowing ratio for film cooling on a flat plate
Title of publication:INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW
Published in :Detailed entropy generation analysis of a Wells turbine using the variation of the blade thickness
Title of publication:ENERGY
Published in :Optimization of the Rectangular Storage Tanks for the Sloshing Phenomena Based on the Entropy Generation Minimization
Title of publication:ENERGY
Year :2016
Published in :Natural convection of Cu–water nanofluid near water density inversion in horizontal annulus with different arrangements of discrete heat source – Sink pair
Title of publication:ADVANCED POWDER TECHNOLOGY
Published in :Entropy generation analysis for film boiling: a simple model of quenching
Title of publication:European Physical Journal Plus
Published in :A comparison between entropy generation analysis and first law efficiency in a monoplane Wells turbine
Title of publication:Scientia Iranica
Year :2015
Published in :Numerical simulation of melting ice around a floating by microwaves
Title of publication:HEAT AND MASS TRANSFER
Published in :Analytical investigation of coalescence effects on the exergy loss in a spontaneously condensing wet-steam flow
Title of publication:International Journal of Exergy
Published in :Improved design of Wells turbine for wave energy conversion using entropy generation
Title of publication:MECCANICA
Year :2014
Published in :PREDICTION OF EROSION WEAR RATE IN A COPPER SLURRY PIPELINE, (A CASE STUDY
Title of publication:Journal of the Balkan Tribological Association
Published in :NUMERICAL ANALYSIS OF MELTING OF NANO-ENHANCED PHASE CHANGE MATERIAL IN LATENT HEAT THERMAL ENERGY STORAGE SYSTEM
Title of publication:Thermal Science
Published in :Slip effects on the exergy loss due to irreversible heat transfer in a condensing flow
Title of publication:International Journal of Exergy
Year :2013
Published in :شبیه سازی پدیده تغییر فاز ناگهانی بخار آب با معادلات جوانه زایی و رشد قطرات مناسب در فشار های چگالشی پایین (ISC)
Title of publication:مكانيك هوافضا
