Year :2024
Published in :Comparison of two novel geothermal‑powered cooling systems based on 4E evaluations
Title of publication:Clean Technologies and Environmental Policy
Year :2023
Published in :Thermodynamic feasibility and multiobjective optimization of a closed Brayton cycle-based clean cogeneration system
Title of publication:Journal of Thermal Analysis and Calorimetry
Published in :Multi-objective optimisation of a transient solar absorption chiller from energetic, exergetic, and economic viewpoints
Title of publication:International Journal of Exergy
Year :2022
Published in :Comparing the profitability of waste heat electricity generation of internal combustion engines: An exergoeconomic analysis through optimization of two different organic Rankine cycle scenarios
Title of publication:Applied Thermal Engineering
Year :2021
Published in :Investigation effects of roughness in wet steam flow with Buckingham Pi-theorem
Title of publication:JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Published in :Investigation effects of roughness in wet steam flow with Buckingham Pi-theorem
Title of publication:JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Published in :Multi-objective optimization of a novel offshore CHP plant based on a3E analysis
Title of publication:ENERGY
Year :2020
Published in :Introducing an optimum gas turbine inlet temperature (TIT) based on a 4E analysis: a case study of northeastern Iran
Title of publication:JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Published in :Evaluation of a heat recovery steam cycle based on energy, exergy, environmental and economic analyses
Title of publication:International Journal of Exergy
Published in :Simultaneous optimization of working fluid and boiler pressure in an organic Rankine cycle for different heat source temperatures
Title of publication:ENERGY
Year :2019
Published in :Designing and optimizing a novel cogeneration system for an office building based on thermo-economic and environmental analyses
Title of publication:RENEWABLE ENERGY
Published in :Optimizing the insulation thickness of external wall by a novel 3E (energy, environmental, economic) method
Title of publication:CONSTRUCTION AND BUILDING MATERIALS
Published in :Introducing a novel optimized Dual Fuel Gas Turbine (DFGT) based on a 4E objective function
Title of publication:JOURNAL OF CLEANER PRODUCTION
Published in :Optimizing the bio/natural gas ratio in a dual‑fuel gas turbine (DFGT) through energy‑economic, environmental, and renewability analyses
Title of publication:ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY
Published in :Estimating heat release due to a phase change of high-pressure condensing steam using the Buckingham Pi theorem
Title of publication:European Physical Journal Plus
Published in :Examining the curvature dependency of surface tension in a nucleating steam flow
Title of publication:HEAT AND MASS TRANSFER
Published in :Entropic Optimization of the Economizer's Pressure in a Heat Pump Cycle Integrated with a Flash-Tank and Vapor-Injection System
Title of publication:INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
Year :2018
Published in :امکان سنجی احداث دو واحد همزمان تولید حرارت و برق با بیوگاز در تصفیه خانه فاضلاب شهری
Title of publication:مهندسی مکانیک دانشگاه تبریز
Published in :Analytical investigation of simultaneous effects of convergent section heating of Laval nozzle, steam inlet condition, and nozzle geometry on condensation shock
Title of publication:JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Published in :Thermo-environmental and economic analyses of an integrated heat recovery steam-injected gas turbine
Title of publication:ENERGY
Published in :Energetic and exergetic optimized Rankine cycle for waste heat recovery in a cement factory
Title of publication:APPLIED THERMAL ENGINEERING
Year :2017
Published in :Evaluating the radius dependency of surface tension in nano-droplets by a diffuse-interface lattice Boltzmann
Title of publication:Progress in Computational Fluid Dynamics
Published in :Investigating the effects of shear rate on the collapse time in a gas–liquid system by lattice Boltzmann
Title of publication:MECCANICA
Published in :Discussion of “Energetic and exergetic analysis of waste heat recovery systems in the cement industry” by Karellas et al. “Energy” 58 (2013) 147-156
Title of publication:ENERGY
Published in :A note on the critical gap of bubble coalescence during foaming process: A diffuse-interface modeling
Title of publication:Scientia Iranica
Year :2016
Published in :مدلسازی قطره پایدار معلق در بخار به کمک روش شبکه بولتزمان
Title of publication:Journal of Computational and Applied Research in Mechanial Engineering - JCARME
Year :2015
Published in :Control of droplet collapse during coarsening process by imposing shear flow: a lattice Boltzmann simulation
Title of publication:MECCANICA
Year :2014
Published in :Coalescence of two at-rest equal-sized drops in static vapor of the same material: A lattice Boltzmann approach
Title of publication:Journal of Mechanical Science and Technology
Published in :Analytic investigation of the e ects of condensation shock on turbulent boundary layer parameters of nucleating ow in a supersonic convergent-divergent nozzle
Title of publication:Scientia Iranica
Published in :Investigation the effects of shear rate on stationary droplets coalescence by lattice Boltzmann
Title of publication:MECCANICA
Published in :Analytical investigation into simultaneous e ects of friction and heating on a supersonic nucleating Laval nozzle
Title of publication:Scientia Iranica
Year :2013
Published in :Evaluation of simultaneous effects of inlet stagnation pressure and heat transfer on condensing water-vapor flow in a supersonic Laval nozzle
Title of publication:Scientia Iranica
Year :2012
Published in :Theoretical investigation of effects of local cooling of a nozzle divergent section for controlling condensation shock in a supersonic two-phase flow of steam
Title of publication:MECCANICA
Year :2011
Published in :Reducing entropy generation by volumetric heat transfer in a supersonic two-phase steam flow in a Laval nozzle
Title of publication:International Journal of Exergy
Year :2010
Published in :Suppression of Condensation Shock in Wet Steam Flow by Injecting Water Droplets in Different Regions of a Laval Nozzle
Title of publication:Scientia Iranica
Year :2009
Published in :Reduction of Thermodynamic Losses in a Supersonic Nucleating Steam Nozzle by Spraying Water Droplets
Title of publication:Scientia Iranica
معرفی و بهینه سازی یک سیستم جدید توربین گازی با سوخت دوگانه بر مینای تحزیه تحلیل اقتصادی - زیست محیطی ' in 2019'
ششمین کنفرانس انرژی پاک
بررسی تغییرات چگالی، ویسکوزیته سینماتیک و کشش سطحی در شبیه سازی دوبعدی پدیده برخورد قطره با سطح صاف افقی توسط متد VOF ' in 2016'
کنفرانس ملی مهندسی مکانیک و مکاترونیک ایران
تاثیر چرخش بر نیروهای آیرودینامیکی در پرتابه M910 در زاویه های حمله مختلف ' in 2016'
پانزدهمین کنفرانس بین المللی انجمن هوا فضا
بررسی فرآیند برخورد دو قطره هم اندازه در سیستم های تک جزئی دوفاز با استفاده از روش بولتزمن شبکه ای ' in 2016'
کنفرانس پژوهش های کاربردی در مهندسی برق، مکانیک، مکاترونیک
بررسی مصرف انرژی در صنایع شیشه ' in 2015'
سومین کنفرانس ملی سیستم های مکانیکی و نوآوری های صنعتی
بررسي تأثير معادلات مختلف جوانه زايي بر توزيع فشار در نازل هاي همگرا-واگراي فراصوت دوفازي به كمك يك روش لاگرانژي-اويلري ' in 2014'
پنجمين كنفرانس ملي كاربرد CFD در صنايع شيميايي و نفت
Numerical Simulation of Coalescence of Two Stationary Droplets Using Lattice Boltzmann Method ' in 2014'
بیست و دومین کنفرانس سالانه مهندسی مکانیک
Numerical Simulation of Coalescence of Two Stationary Droplets Using Lattice Boltzmann Method ' in 2014'
the 22nd Annual International Conference on Mechanical Engineering
The Coalescence of Two Stationary Droplets: A Numerical Approach ' in 2013'
15th Fluid Dynamics Conference
Investigation of Stationary Droplet Coalescence in a two phase system under shear flow using free energy Lattice Boltzmann ' in 2013'
Proceedings of the 2013 International Conference on Applied Mathematics and Computational Methods in Engineering
The Effects of Water Injections in Wet Steam Flow in Different Regions of a Mini Laval Nozzle ' in 2008'
ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels
Effective Reduction of Condensation Shock Strength in Two Phase Supersonic Flow by Spraying Water Droplets In Laval Nozzle ' in 2008'
Proceedings of the 12th Asian Congress of Fluid Mechanics,
بررسي چگونگي بهبود معادلات رشد قطرات و نحوه توليد آزمايشگاهي آن در ورودي به پره هاي توربين بخار ' in 2008'
شانزدهمين كنفرانس سالانه مهندسي مكانيك
روش اندازه گيري تلفات در پايين دست جريان دوفازي در پره هاي ثابت توربين بخار ' in 2007'
پانزدهمين كنفرانس سالانه مهندسي مكانيك
